aeotec wallmote aeotec wallmote

WallMote

The no-wiring solutions for new, intelligent wall switches

Install a new switch anywhere in your property easily - no wiring required.

While it looks like a wall switch and operates like a wall switch, what makes WallMote truly powerful is that it is really a remote control. Battery powered, you just need to stick it on a wall or surface to install it. Once synced with your hub, you can control any dimmer, switch or automation routine by using WallMote as you would any other switch.


Looks like a switch
3 models. 1 distinct style. Whether you're in need of a simple switch or something with more capability, there's a WallMote that's right for your installation and the needed aesthetic.
z-wave remote control
Runs like a remote
They might be installed upon a wall, but you don’t have to install them within a wall. WallMote runs wire free. Its installation doesn’t require a backing box nor mains power. Stick it. Sync it. Use it.
coin cell battery
Long live batteries
Wiring makes installing a new switch expensive. Batteries make installing a new WallMote switch cheap. WallMote and WallMote Quad are both powered by a USB-rechargeable lithium battery designed for smartphones.

aeotec wallmote controller aeotec wallmote controller

Control one thing. Control anything.

Control lights. Control outlets. Control a whole room or a whole property.

It may be styled like a wall switch, but WallMote is much more capable. Once setup with a compatible gateway it can be used to control anything that your gateway can. That ranges from single switches to dimmable light banks, from power outlets to the smart locks that protect your property. And even things that do not utilize the same Z-Wave wireless standard that WallMote does. Smart lighting from Philips Hue? Check. Connected music from Sonos? Easy. If it is connected to your gateway, simply setup WallMote to control any manner of simple or complex routine or automation.

control television
Appliances
control lighting
Lights
control electronics
Electronics
control music
Music
control motorised curtains
Motorised curtains
control air conditioning
Cooling
control heating
Heating
control everything
Your whole property

aeotec wallmote range aeotec wallmote controller

3 switches. 2 looks.
WallMote for any wall.

Spirit law pinnacle love decieve revaluation. Value intentions christian ultimate philosophy abstract will derive free ascetic decieve chaos joy virtues.

 
WallMote

WallMote 7

WallMote Quad
Buttons 2 2 4
Multi-tap
Each button is able to control multiple automation scenes
4 6 8
Surface mounting Double-sided tape Screws, double-sided tape Double-sided tape
Magnetic mounting Yes Yes Yes
Wall box compatible No Yes No
Face plate compatible No Yes
Decora compatible
No
Dimensions 77 x 77 x 11 mm
3 x 3 x 0.4 in
104 x 46 x 13 mm
4 x 1.8 x 0.5 in
77 x 77 x 11 mm
3 x 3 x 0.4 in
Generation Gen5 Gen7 Gen5
Z-Wave Plus 500 series 700 series 500 series
Battery rechargeable battery
Inbuilt, 3.7V
USB rechargeable
>coin cell battery
2 x 3.0V CR2032
Replaceable
rechargeable battery
Inbuilt, 3.7V
USB rechargeable

Stick it. Screw it.

Installing WallMote requires no wiring. You can install any of the 3 models upon a wall by simply affixing the mounting plate using the provided, double-sided tape. Or you can invisibly install WallMote 7 within a single or multi-switch gang box.

Install WallMote 7 within a wall box.

A seamless installation of WallMote 7 can be achieved using Aeotec's provided screwless-decora plate or a fascia of your own choice. Wall box installations of the square models of WallMote are not possible.

step 1

wallmote 7 installation step wallmote 7 installation step
Affix WallMote 7's gang box plate to your selected wall box using 2 screws.

step 2

wallmote 7 installation step wallmote 7 installation step
Screw WallMote 7's mounting plate to the gang box plate using 2 screws.

step 3

wallmote 7 installation step wallmote 7 installation step
Firmly place Aeotec's screwless face plate against the mounting plate to lock it in place.

step 4

wallmote 7 installation step wallmote 7 installation step
Place WallMote 7 into the centre, it will stay in place magentically and remain removable.

Install WallMote 7 upon a wall.

step 1

wallmote 7 installation step wallmote 7 installation step
Peel off the adhesive protective sheet from the rear of WallMote 7's gang box plate.

step 2

wallmote 7 installation step wallmote 7 installation step
Affix the gang box plate to your chosen surface pressing it firmly in place for at least 5 seconds.

step 3

wallmote 7 installation step wallmote 7 installation step
Screw the mounting plate and gang box plate together using 2 screws; attach Aeotec's screwless fascia.

step 4

wallmote 7 installation step wallmote 7 installation step
Place WallMote 7 into the centre, it will stay in place magentically and remain removable.

WallMote 7 packaging WallMote packaging

Where to buy WallMote 7

Aeotec WallMote 7 is available from a number of retailers including at Amazon and SmartMatters. Aeotec's illumino WallMote 7 (ZWA022) will begin shipping across the United States in September.

Receive an alert when it's released via Aeotec's newsletter service.

For more information on WallMote:

WallMote Quad packaging WallMote Quad packaging

WallMote packaging WallMote packaging

Where to buy WallMote

Select your country from the following drop down list to find out which Aeotec retailers have reported selling WallMote Quad (ZW130).

And select from this list to to find retailers of WallMote (ZW129).

For more information on these 2 models:

Control doesn't stop here

Aeotec’s range of intelligent, automation controllers doesn’t end with WallMote. From smart plugs to smart motors, it’s a range that keeps you in control and ensures that automation systems are always an intelligent enhancement.

Find out more: switches & dimmers

illumino range illumino range

Find out more

Ask below if there's something more you'd like to know about . All fields required.

Questions?