With 6 separate sensors built into this 7th generation sensor from Aeotec, there are far too many MultiSensor 7 features and technical aspects to describe in a single page. Instead, below is a highlight of key upgrades and feature enhancements which help to make MultiSensor 7 the premier automation sensor.
| Z-Stick 7 | Z-Pi 7 | Z-Stick Gen5+ | |
|---|---|---|---|
| Z-Wave Plus | Yes | Yes | Yes |
| Z-Wave 700 series | Yes | Yes | No |
| Gen7 | Yes | Yes | No, Gen5 |
| SmartStart setup | Yes | Yes | Yes |
| S2 security | Yes | Yes | Yes |
| Z-Wave SDK | 7.11.0 or later | 7.11.0 or later | 6.81.06 |
| Z-Wave SDK | No | No | Yes |
| Internal battery | No | No | Yes |
| Backup compatible | Yes | Yes | Only with custom software |
| CPU speed | 39 MHz | 39 MHz | 32 MHz |
| SRAM Memory | 32 kB | 32 kB | 16 kB |
| Flash Memory | 256 kB | 256 kB | 128 kB |
| Wireless range (indoors) 908.4MHz model | More than 70 metres More than 230ft | More than 70 metres More than 230ft | Up to 75 metres with amplification Up to ~246ft with amplification |
| Wireless range (indoors) 868.4MHz model | Up to 60 metres Up to 197ft | Up to 60 metres Up to 197ft | Up to 75 metres with amplification Up to ~246ft with amplification |
| Wireless range (outdoors)1 | Up to 150 metres Up to ~492ft | Up to 200 metres Up to ~656ft | Up to 150 metres Up to ~492ft |
| Connection type | USB | GPIO | USB |
| Controller type | Bridge controller | Bridge controller | Static controller |
| Transmit sensitivity | 9.3 dBm | 9.3 dBm | 2.91 dBm |
| Receive sensitivity | -97.5 dBm | -97.5 dBm | -90 dBm |
| Weight | 3.6g / 0.13oz | 6.5g / 0.23oz | 19g / 0.67oz |
| Dimensions | 37 x 17 x 8.5mm 1.46 x .67 x .33" | 42 x 35 x 12mm 1.65 x 1.38 x .47" | 88 x 28.5 x 10mm 3.46 x 1.1 x 0.39" |
For further information on Z-Stick 7, please refer to the following documents or contact Aeotec.
For further information on Z-Pi 7, please refer to the following documents or contact Aeotec.
In conjunction with Popp.to, Aeotec has made early-access versions of the successor to Z-Stick Gen5+, Z-Stick 7, available for the purposes of testing and development. As 700 series Z-Wave is not yet compatible with all automation software, including open-source software, please use this compatible gateway software list to ensure that Z-Stick 7 is compatible with your chosen software prior to deciding between Z-Stick Gen5+ or Z-Stick 7.
For more information on Z-Stick 7:
Automation systems are only as good as the devices they depend on. From sensors to controllers, Aeotec has device for every space.
Behind all quality automation systems is software that intelligently responds to your environment, needs, and schedule.
Ask below if there's something more you'd like to know about . All fields required.