Water Sensor 7 Pro

Flood Sensor. Leak Sensor.

It’s the building block of life. It’s also the building block of expensive bills and costly damage when it ends up where it shouldn’t.
Temperature-
sensor
Humidity-
sensor
Tamper
protection

Leak detection.

What comes up. If it were only a leak detector, we wouldn’t call it Water Sensor 7 Pro. Monitoring more than just the presence of liquid, Water Sensor 7 Pro earns its name through its ability to also monitor the absence of water. When used to monitor tanks or pits, Water Sensor 7 Pro can alert you when water levels get too low and can also trigger automation routines. 

Sensor cable measures 1.5m / 4.9ft

Icon-Leak-detection

Leaks & bursts.

Water Sensor 7 Pro’s stainless-steel detection-tip can detect minuscule amounts of water – as little as 0.5mm / 0.02” on a surface – making it your first line of defence against damaged and faulty plumbing.

Icon-Floods

Floods.

Whether a small amount or large, Water Sensor 7 Pro also is perfect at monitoring for the accumulations and floods that you can anticipate, such as sump basins and in wet areas.

Icon-Owerflows

Overflows.

Accidents happen but that doesn’t make the damage caused by forgotten taps any less expensive. Water Sensor 7 Pro can alert you to the water you’ve forgotten to turn off before it’s too late.

Leak protection.

It doesn’t just monitor for when water goes wrong. Once connected to a Z-Wave automation system, Water Sensor 7 Pro can take protective measures to help limit the amount of damage caused by drips, leaks, bursts or other water flow.
Icon-Auto-close-water-valves

Auto-close water valves.

In the event of a pipe burst, Water Sensor 7 Pro can instruct water valves, including those installed on the mains, to automatically close.

Icon--sump-pumps

Turn on sump pumps.

When water levels are detected to be too high or low, turn electronic pumps or sump pumps and run them for a defined period of time or till the desirable water level is reached.

Icon-Auto-turn-off-power

Auto turn off power

Water and electricity don’t mix. In the event of a leak or flood protect your home and family by turning off connected-electronics, such as those plugged into Smart Switch 7.

Quality Foundation.

Water Sensor 7 Pro’s accuracy, reliability, and compatibility begin at its very foundation. With its leak processor sized at only 70x30mm (2.8×1.9in), it has been built atop of Aeotec’s exclusive Gen7 technology enabling it to be wireless installed almost anywhere in a room and to operate for 3 years before its single, 3.6 volt battery needs changing.

Control doesn`t stop here.

Aeotec’s range of intelligent, automation controllers doesn’t end with TriSensor. From MultiSensor to TriSensor, it’s a range that keeps you in control and ensures that automation systems are always an intelligent enhancement.

Consent Management Platform by Real Cookie Banner